1. Remove the 8" Small and medium rings from Bigfoot
2. Snap Section No. 1, with arrow pointing down, on the Bigfoot.
3. Snap section No.2 on section No.1.
4. Snap section No.3 on section No.2.
5. Snap section No.4 on Section No.3.
6. When assembled, ensure all sections are completely snapped together
by firmly pushing down on the top of the BFT8.
7. Place Bigfoot system in the excavation.
8. Follow the installation instructions for
below ground install
9. When ready to pour concrete, remove the safety top from the BFT8.
Note: Concrete Volume 1.4 Cubic feet
Call 1-800-934-0393